| Use condition | Material question | Evidence context |
|---|---|---|
| Repeated contact | How does the coated face behave under seating, handrails, or frequent touch? | Relevant abrasion or care method, plus the finish state of the specimen |
| Moisture | Is the question liquid water on a shade or canopy, or vapour movement through the build? | Separate hydrostatic method from vapour transmission, with conditioning noted |
| Dimensional change | What tension, heat, or cleaning cycle will the tensile or cover cloth see? | Test state, reference length, and whether coating mass is part of the specimen |
| Joining | Will panels be welded, sewn, or bonded, and what usable width does the pattern need? | Construction, edge behaviour, and roll-level cuttable width |
| Colour | Which physical shade reference is being held against the architectural palette? | Dated sample, light condition, and batch note rather than a screen image |
A coated substrate places a coating add-on on a base cloth. The review questions are add-on, adhesion, and how the face flexes. A laminated construction bonds a film to the cloth. The review questions are the film, peel behaviour, and the specimen state after bonding. Neither description ranks durability, and neither is assumed for a Serge Ferrari shade or tensile reference. If the brief does not name the build, leave the word blank.
A durability target needs the abrasion method and the stopping condition. A handle target needs the physical sample under the contact and light the project will use. An abrasion result does not describe pilling, sheen, or how the coating feels after cleaning. Natural-fibre and synthetic-fibre routes split the same way: handle, moisture uptake, and care on one side; strength, drying, and the chance of a coating or film on the other. Environmental wording stays inside the source that names the input and the process.
Request mass in g/m², usable width in centimetres, and composition as percentages by mass that sum to 100. Yarn linear density, when a yarn is part of the construction, is recorded in dtex or denier: 1 dtex is 1 gram per 10,000 metres, and 1 denier is 1 gram per 9,000 metres. Many textile methods condition specimens to ISO 139, a standard atmosphere of 20 °C and 65% relative humidity, with the tolerances printed in that standard. Naming ISO 139 records the atmosphere to ask for. It is not a reported result for a Serge Ferrari construction.
Results from different methods are not automatically comparable. A facade screen, a tensile canopy, and an outdoor seat can share a brand conversation and still need different evidence. Openness and light for a shade cloth are not the same datum as tear or tensile strength for a tensioned surface. Contact wear on seating cloth is not a substitute for weather exposure on an awning. When a brief names a Serge Ferrari shade fabric or a tensile fabric, write the environment first: solar orientation, rainfall, cleaning, and the joint method. Then ask which specimen and which version of the method sit behind any figure. Colour approval stays with a physical reference because coating sheen and mesh openness change under project lighting. Processing questions should include pattern width so selvedge is not counted as cuttable cloth. Protective industrial textiles enter the same matrix only when the hazard and the test method are named. Nothing in the matrix is a published result for a specific construction, and nothing here assigns a certificate to this website. If two environments share one cloth, write two rows rather than averaging the stresses. A canopy that is also a rain cover still needs the liquid-water question kept apart from any vapour question. Pattern nesting can change the width you actually cut, so the usable-width line should travel with the joining line. Record the light used for a colour check when the coating sheen is part of the decision.
Say whether the textile is discussed for indoor contact, outdoor exposure or a processing step. One setting per paragraph keeps the later question readable.
Name the behaviour under review, such as handle, moisture, dimensional change or joining. Different behaviours need different methods.
Include composition, construction, quantity and destination only as the context of the request. They do not confirm that a material has been approved for that use.
Exposure, care, and processing make the brief specific.
Discuss your fabric requirements